[2x Pack] Премиум регенерируем Motorola Edge 40 / Edge 40 Neo / Edge (2023) - Smart Protection Classic - Прозрачен

Attention! For an easy and correct installation, please follow in detail the steps listed below.

Step 1: With clean hands

Before installation, clean the work area and wash your hands thoroughly. It is very important to apply the film in an environment free of dust, smoke, lint, lint or other impurities.

Step 2: Check the film

Overlay the foil on the Motorola Edge 40 to check compatibility. Once you've made sure there is a perfect fit remove any unnecessary debris from the foil.

Step 3: Lubricate the foil

Spray Smart Spray on your fingers. Peel the foil off the backing, gradually spraying the entire adhesive side.

Caution! The foil needs lubrication, so spray lightly.

Step 4: Position the film

Place the film with the sticky side on the Motorola Edge 40 screen and fit it perfectly. Don't worry, thanks to the lubrication the foil will allow multiple repositions.

Step 5: Remove air and liquid bubbles

After the correct and final positioning of the foil, we use the microfiber cloth and the Smart Squeegee card to completely remove the excess air and liquid. The process consists of gently pressing from the center of the display towards the ends.

Caution! In case of a faulty installation, it is allowed to reapply the film within 3-4 minutes after installation.

Attention! We recommend you to use your phone carefully during the first 48 hours after the installation.