[2x Pack] Samsung Galaxy Z Flip6 / Flip7 FE - Smart Protection Classic - Прозрачен

Attention! For an easy and correct installation, please follow in detail the steps listed below.

Step 1: With clean hands

Before installation, clean the work area and wash your hands thoroughly. It is very important to apply the film in an environment free of dust, smoke, lint, lint or other impurities.

Step 2: Check the film

Overlay the film on the Samsung Galaxy Z Flip6 to check compatibility. Once you've made sure there's a perfect fit remove any unnecessary debris from the foil.

Step 3: Lubricate the film

Spray Smart Spray on your fingers. Peel the foil off the backing, gradually spraying the entire adhesive side.

Caution! The foil needs lubrication, so spray lightly.

Step 4: Position the film

Place the film with the sticky side on the Samsung Galaxy Z Flip6 screen and fit it perfectly. Don't worry, thanks to the lubrication the film will allow multiple repositioning.

Step 5: Remove air and liquid bubbles

After correct and final positioning of the foil, we will use the microfiber cloth and the Smart Squeegee card to completely remove excess air and liquid. The process consists of gently pressing from the center of the display towards the ends.

Caution! In case of a faulty installation, it is allowed to reapply the film within 3-4 minutes after installation.

Attention! We recommend you to use your phone carefully during the first 48 hours after the installation.